[MOSES89]

The kit from Kufatec is €799 (March 2021). It includes

• 2 x exterior mirrors (housing)
• Adjustment button
• Accessory parts
• Coding dongle

The auto dimming/anti dazzle mirror glasses are NOT included. These are quite expensive. I bought mine used and payed around €70 for each.

What is the "Accessory parts"?
I am looking to buy the parts separately to save on £££

 

[MOSES89]

The "Accessory Parts" refers to the Handle Shell and 6 small Torx screws that hold the Mirror Trim (among others) in place. The screws are not required as you can use the ones in your current mirror housings. All the parts you need are listed in the parts list above, nothing more, nothing less.

thanks

have you considered going for a 360 camera retrofit while you’re at it? Or is that a bit too much of a job

 

[MOSES89]

I did not consider the 360 camera upgrade, thus I did not investigate the extra effort. As far as I know, there is one additional cable running from the camera in mirror housing and that cable needs to be connected to a cable in the door. That cable is probably not routed, unless the camera option is already installed (I guess). Additional wiring and hardware might also be required and coding will definitely be required. Perhaps someone else can provide some information regarding this matter.

Thanks,
looked into it and looks like a bit more of a job that I thought.

Did you know if the coupe and sportback mirrors are the same?

8W6857409AK
8W6857410AG

found these on eBay for a good price but the seller seems to think only for coupe. but part numbers are the same apart from last 2 letters.