[Baas J.]

Still for sale!

 

[jnrdavo]

how much including shipping to Sydney Australia mate (postcode 2085)??

 

[Baas J.]

jnrdavo, I sent you a PM.

 

[A5JXU08]

Does anybody have the definitive/necessary codings needed to make the memory seat/auto tilt mirror functions work.
I now have all the hardware in place and just need the coding.
Thanks in advance.

 

[Chaznik]

I did this mod today and thanks for the write up.

I purchased a doorcard with the buttins and wiring which made for an easier swap over. It did need the illumination wires connecting but not a huge challenge.

All lights up and works inc beep, not mirror memory function. Not sure if additional coding is required or whether it has the functionality?

 

[Chaznik]

Pic below. Does anybody have the one touch movement when the dokr is opened? Seem to have to always hold the button down whereas my SQ5 the seats move with one touch when you open the door

 

[Baas J.]

My set is SOLD.

 

[superjim02]

in audi s5 is the module j136 present ? thanks

Envoyé de mon SM-G930F en utilisant Tapatalk

 

[Baas J.]

in audi s5 is the module j136 present ? thanks

Envoyé de mon SM-G930F en utilisant Tapatalk

Check under your seat

Or do a VCDS scan and see if it lists J136.

 

[superjim02]

Check under your seat

Or do a VCDS scan and see if it lists J136.

ok thanks

Envoyé de mon SM-G930F en utilisant Tapatalk

 

[mrpardal]

So, I have an A5 spotback 2016 with keyless and electric seats.
I cannot access the module because I think only the coupe version have it.
Can I buy the module and then just code it to install memory seats without the door controller?

Thanks!

 

[Brice_74]

Hi, anyone know the coding for passenger memory button ? Thx in advance

 

[Hapsdoggen]

Will this work on sportback model

 

[Baas J.]

yes

 

[RedSun]

Hi Guys, sorry for bump the topic but i need a info about this J136

now im working on el. steering column adjust and i coulnd find any informationin elsa.

If you know the pinout for this can you share with me please.

thank you

 

[Kapur]

Hi. I know I'm digging up an old thread here, but I'm hoping someone can provide some clarity on which wires go to which connector. I have a 2011 Cab with full electric seats, and the memory modules required. I have the memory switch too. Just needed some assistance with wiring it all in. I have access to VCDS, so I don't have any problems coding. Have read through this post countless times, but still unsure on which wires to wire into which connectors.

 

[TonyP]

Hi Kapur, I did this a while ago to my S5 B8.5 Coupe, so I'm not 100% sure its the same pin outs, but I have the ones I listed here

2015 S5 Coupé

Hi all.. 2nd attempt at this intro post..... Recently purchased 2015 S5 Black Edition Coupe in Daytona Gray. Had it for 5 days now and love it, going to be hard to manage that right foot... ho hum, mega mpg is not why we purchase these cars. No plans for it yet, just want to enjoy it, and...

www.a5oc.com

 

[Kapur]

Hi TonyP. Thank you so much for your response. Really appreciate it. Based on the link you've posted, if I'm correct, I'll require 8 wires to wire the memory switch to the blue connector (which connects to the module in the door), is this right?

So the memory switch is referred to as: Mem buttons E97 T8x/T10
And the blue connector which connects to the module in the door is referred to as: j386 T32

Is all the above correct? Slightly confused as the first thread in this post mentions 6 wires, but the post you've linked to mentions 8. Apologies if I'm longing this out.

 

[Kapur]

Ok, so I've written this down and its starting to make sense now. I'll order the connector and repair wires just now. Thank you.

 

[TonyP]

I remember it too me a while to figure out and managed to find a wiring diagram, so I made a note of the connections. Yes j386 T32 is the control module