Audi A5 Forum & Audi S5 Forum banner
Cancel

Media added by 033WAJ

Navigation

Browse albums
RS5 Pedals...did not provide before and after images, as there's simply no comparison between the two. Should have been a stock item with the model 5

RS5 Pedals...did not provide before and after images, as there's simply no comparison between the two. Should have been a stock item with the model 5

  • 0
  • 0
A clean "show" look as originally intended by the designers. Here in the Pacific Northwest, the plate is required which is why I've modded t

A clean "show" look as originally intended by the designers. Here in the Pacific Northwest, the plate is required which is why I've modded t

  • 0
  • 0
Before taking delivery of the new car, had an S5 grille installed because I prefer the bolder look with the chrome vertical lines. Not a poser, so th

Before taking delivery of the new car, had an S5 grille installed because I prefer the bolder look with the chrome vertical lines. Not a poser, so th

  • 0
  • 0
Before and After My wheels are 255/35R R19 Y Spokes...have found that with these alloys, 15mm up front works well and at the rear - could go between

Before and After My wheels are 255/35R R19 Y Spokes...have found that with these alloys, 15mm up front works well and at the rear - could go between

  • 0
  • 0
H&R Spacers from RPI Equipped!

H&R Spacers from RPI Equipped!

  • 0
  • 0
DR's are available up to 15mm and require longer bolts that pass through the spacer and secure to the car. DRA's come with additional bolts that firs

DR's are available up to 15mm and require longer bolts that pass through the spacer and secure to the car. DRA's come with additional bolts that firs

  • 0
  • 0
DRs for the front wheels require longer than the existing OEM wheel bolts to pass through and attach to the wheel hub. DRAs can use OEM bolts to secu

DRs for the front wheels require longer than the existing OEM wheel bolts to pass through and attach to the wheel hub. DRAs can use OEM bolts to secu

  • 0
  • 0
Torque Wrench

Torque Wrench

  • 0
  • 0
There was a discussion in the forum about how to use both the OEM scissor jack AND a jack stand together...where do you place them? Side by side, as

There was a discussion in the forum about how to use both the OEM scissor jack AND a jack stand together...where do you place them? Side by side, as

  • 0
  • 0
Wheel Ramps

Wheel Ramps

  • 0
  • 0
Invaluable Toolbox items

Invaluable Toolbox items

  • 0
  • 0
SD Cardholder

SD Cardholder

  • 0
  • 0
Good way to protect the wheels and rims without unbalanced pressure that typically happens when wheels are standing or stacked on the ground.

Good way to protect the wheels and rims without unbalanced pressure that typically happens when wheels are standing or stacked on the ground.

  • 0
  • 0
Using hole saw to drill through the plywood, the pipe passes through and balances a wheel on both sides of the wood panel. Although each pipe is capp

Using hole saw to drill through the plywood, the pipe passes through and balances a wheel on both sides of the wood panel. Although each pipe is capp

  • 0
  • 0
Top