Audi A5 Forum & Audi S5 Forum banner

Requirements for stage 2 remap

1461 Views 8 Replies 3 Participants Last post by  AsaAudiA5
Hi all I have an Audi A5 tfsi Quattro 208bhp 2008. It currently has a stage 1 remap and a basic pippercross panel filter. Does anyone know the exact requirements for a stage 2 remap. I want to add as much bhp as possible without going to stage 3 can someone suggest every upgrade I can do to achieve this apart from a bigger turbo. Getting anywhere close to 300 would be amazing I think my stage 1 is around 261 bhp currently
Many thanks.
1 - 3 of 9 Posts
Good luck trying to hit 300 ponies without a K04 upgrade.

I’d be inclined to see Dyno runs with horsepower from the fly as of right now just to truly see how much horsepower you need to get to the magical 300 👀

With all the supporting mods getting true 280HP on the fly is more probably the actual best you could possibly get.

-intercooler
-high flow cat / exhaust system
-fuel pump
-injectors
-stage 2 remap

~Alex

edit: meth injection system, maybe strap some rockets too hahaha😂
See less See more
I mean selling your car and getting an s3 for performance would make more financial sense.

But a built car is something else though am I right?

Even so, if you’re just chasing horse power then yes, your suggestion makes sense from a financial stand point.

~Alex
I wouldn’t upgrade the fuel pump as of yet, it’s not the best bang for buck. Also only really needed further in the build when you have the bigger turbo set up.

if you don’t go past 300 then there’s more probably not much point in touching the fuel pump now that I think about it 🤔

And yes, I have the 3.0 TDI Quattro, stage 1 remap got me to 310 horses and just under 600nm with dyno result printout. all stock too which is brill.

~Alex
1 - 3 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top