[BlackA5JR]

Hi all
I saw someone posted a coding list on another thread and this is what i have used (please see attached photo)
These are the only channels I have changed, my lights work the indicators are illuminated permanently, fog lights come on with reverse. I am unsure of the reverse light operation and brake lights as i was doing it alone. If you could help it would be greatly appreciated and if you need any more info don’t hesitate to contact me.

 

[BlackA5JR]

CODING

 

[gdjohny]

hi. If you are using kufatec harnes make sure they are in right places : left on left right on right . I had issue with mine pins were moved by one position ......

 

[BlackA5JR]

hi. If you are using kufatec harnes make sure they are in right places : left on left right on right . I had issue with mine pins were moved by one position ......

I am using the kufatec harnesses and thanks pal will check they are the right way round

 

[gdjohny]

I am using the kufatec harnesses and thanks pal will check they are the right way round

did you managed to get it sorted mate?

 

[BlackA5JR]

did you managed to get it sorted mate?

In a kind of sense my indicators are still running as drls and only one indicator light comes on but no fault code from the other anyway at least its in a ‘legal’ state now 😂

 

[gdjohny]

In a kind of sense my indicators are still running as drls and only one indicator light comes on but no fault code from the other anyway at least its in a ‘legal’ state now 😂

Have you checked if its coded for USA lights ?