This is it!
The proper activator for Audi MHS2 systems made by delphi.
It a result of deep system analysis and some good reverse engineering.
The time has come and i have decided to share it!
Now is available free of charge for everyone!
Unlike the leaked version of the activator this one is tested and in use for quite long time now.
You will not loose ability to install custom POI's and for sure it will not cripple your legal function enabling codes.
I cannot guarantee that will work on every MMI out there, but i never had issues ever since i created it back in 2016.
Regardless of what some might say, update of the MMI is not mandatory. This is entirely up to you.
If your MMI is working properly and you have not noticed issues then you can continue using same version.
Believe me, i know these systems inside out.
As you will see bellow the supported versions list is quite long and will only get longer with time!
In case that you do decide to update then subscribe to this topic as i will update it to include software update info and files.
In the archive you will find a manual how to use it.
It is very simple process and you will only need one empty SD card size 8-32GB FAT32 formatted.
After activating the MMI you will be able to use latest navigation maps.
Here is list of supported versions, it was tested on many more but for now i decided to include the following.
If your software is not the support list then send the backup that the activator will make and i will add it. Always make sure you are using the latest version of the activator.
Almost any version out there!
If for some reason you cant get it to work following the manual then its likely that your unit was already patched.
In such case contact me and i will see what i can do about it.
Please have in mind that im doing this in my free time and that means that im not 24/7 available
The map of MHS2/MST2(soon to be released) is not installed, you copy map on SD and just insert in the unit. If coding is ok and fecs are shown as valid then map will work.
Simple as that
After using the activator unit will accept modified meta.
What you need to do is take the meta from 1242, remove any SupportedTrains or BlockedTrains and then replace MetafileChecksum with skipMetaChecksum.
For for example with the meta from 1242:
Remove those two lines
BlockedTrains = "MHS2_EU_AU_P01*,MHS2_EU_AU_K01*"
MetafileChecksum = "cd15b1487917b24e0ca50e0716bfa3d6dd7d710d"
And add these two:
EnableUserDefinedSWDLMode = "true"
skipMetaChecksum = "true"
Then make sure all components are select, the bare minimum is - MCM,78K0R,AP_ZR_HIGH1,TNRREF. Nice to select SpeechRes,SpeechAppRes.
Keep in mind that if something goes wrong you might not be able to fix it yourself and might need to send it to me.
This document and activation are provided by THE PROVIDER "as is" and "with all faults." THE PROVIDER makes no representations or warranties of any kind concerning the safety, suitability, lack of viruses, inaccuracies, typographical errors, or other harmful components of this document. There are inherent dangers in the use of any software, and you are solely responsible for determining whether the procedure described in this document is compatible with your equipment and other software installed on your equipment. You are also solely responsible for the protection of your equipment and backup of your data, and THE PROVIDER will not be liable for any damages you may suffer in connection with using the information found in this document. You are also solely responsible for any modifications to the software of the MMI system, THE PROVIDER will not be liable for any claims from the vendor of your MMI system concerning the use of third-party software on the MMI system.
Selling this document and activation is forbidden.
Including this activation or its parts in any other tools should happen only after contacting me.
Attempts to modify the files might render the system inoperable.
Tiguan
MST_EU_VW_P0890D
Hello, does this device have the latest firmware update?
The updated map "DiscoverMedia2_EU-AS_2010_V17" works seamlessly in VW vehicles with 16 GB SD Card.
Change made (Deleted content);
\maps\00\cfg\Delphi\V1\MAN
\maps\00\cfg\mapcfg\SEAT
\maps\00\cfg\mapcfg\SKODA
\maps\00\cfg\mapcfg\se_default.cfg
\maps\00\cfg\mapcfg\sk_default.cfg
Experience and working on 2017 Passat and 2019 Tiguan(MST2_EU_VW_P0890D).
its on you, my recommentation are:
stay actual on your software, even its an older one, see here: release history P9122D (MU0842) ➔ P0867D (MU0867) ➔ your actual P0890D (MU0890) ➔P0891D (MU0891) ➔ P0876D (MU0876) ➔ P0879D (MU0879) and run only the congo activatorfor MST2 ... version 2.1
run congo activator takes (5min.) and use the last maps, this will work good
if you like to update because the actual software are with bugs then here the way:
1. update to MST2_EU_VW_P0879 (under mibsolution.one/ MST2 Delphi)
2. run congo activator v2.1 ...VIN
3. update maps 2022/23
read the readme and pdf inside the activator file 1. sd card with congo activator
2. push menu button for 3 sec.
3. plug the sd card in sd1 slot
4. run the activator
5. after 2 reboots wait someminutes, then its done (green screen normally comes - successfull)
6. take out the sd card and go to pc to read the log.txt file on sd card if all was OK!!
7, test the new function with CAR button push often to change to differant screens now, Carplay/Android Auto, etc.. see FEC´s
use standard sd card with new EU maps
that all
[/ALINTI ]
Are you suggesting I install an older version?
Because "P0890D" installed
MST2_EU_VW_P0879 is this what you recommend?
Öncelikle -> Herkese merhaba.
Yakın zamanda navigasyon sistemi olmayan bir Audi A4 B9'a sahibim. Android Auto ve Carplay varsayılan olarak etkindir ve usb konektörleri arabadadır.
MMI'm şu anda MHS2_ER_AU_P2035 Yazılımına sahip.
Aktivatörü SD Karttan başarıyla çalıştırdım (yeşil Ekran - Tamam). Ardından ilk sayfadan 22/23 Haritalarını indirdi. Bir SD Kart (FAT32 formatlı) takın ve mmi'nin ilk yuvasına yerleştirin.
Ancak başlatma işleminden sonra her zaman navigasyon verisi olmadığını söyledi.
Vcds ile navigasyonu etkinleştirmem gerekir mi? Kontrol ünitesinde herhangi bir programlama gerekli mi?
