Joined
·
149 Posts
FYI All!
I just had my S5 measured by Race Technologies in Costa Mesa, CA. (North American Brembo distributor) and they have templated a brake kit for the S5 and should have it available within a couple of weeks. They are working on a rear kit which may or may not keep the factory e-brake.
My specs are as follows:
Front brake kit with 380x32mm rotor (15"), and use a 6 piston caliper. These will be available drilled or slotted.
You can contact Jerry at:
Race Technologies
1590 Sunland Lane
Costa Mesa, CA 9262
ph: 714-438-1118
fx: 714-438-1119
http://www.racetechnologies.com
I just had my S5 measured by Race Technologies in Costa Mesa, CA. (North American Brembo distributor) and they have templated a brake kit for the S5 and should have it available within a couple of weeks. They are working on a rear kit which may or may not keep the factory e-brake.
My specs are as follows:
Front brake kit with 380x32mm rotor (15"), and use a 6 piston caliper. These will be available drilled or slotted.
You can contact Jerry at:
Race Technologies
1590 Sunland Lane
Costa Mesa, CA 9262
ph: 714-438-1118
fx: 714-438-1119
http://www.racetechnologies.com