[sleepyheadS52011]

Hello all, Looking to install the RS5 spoiler on my S5. I know what I need to get this done... new trunk, spoiler, switch, module and brackets, wiring and hardware, rubber bumpers and springs for trunk. I know this topic has been covered on here and other places a few times but I'm looking for wiring details. I haven't been able to find anything on wiring. I know there's kits out there that you can buy and they come with all the wiring and instructions but I'm not looking to spend 5k on a kit and then even more to get it painted. So I'll be going the used parts route, which most likely means I'll make my own wiring harness. Just need to know where does the switch connect and apparently there's 3 wires that you need to splice into the car harness. Wondering where all that connects, pin-outs, diagrams, instructions or someones experience would be appreciated. Plug and Play harness for this: https://www.ebay.com/itm/324835337110 EDIT: Finally got around to making an install video. See the Youtube link below for part numbers and a walk through on how to do the conversion yourself.

So what are the codes that you can use to retro fit the rs5 trunk because my s5 is 2011 8K0907064CH that’s my code and idk how to tell if it will work…

 

[sleepyheadS52011]

Hi, I sell complete wirelooms for this. It's also in the sale section.

I supplied many people with the correct loom and also have done this retrofit myself on my S5 2013.

Quick question… will this code 8K0 907 064 CH work for rear wing retrofit? Or does nobody know.

 

[sleepyheadS52011]

Hi, I sell complete wirelooms for this. It's also in the sale section. I supplied many people with the correct loom and also have done this retrofit myself on my S5 2013.

Can you make more soon?