Audi A5 Forum & Audi S5 Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
701 Posts

·
Registered
Joined
·
701 Posts
Listen the loom you sold me to go from ‘2g to 3g+’ needed plenty of chopping up as the loom you sell is from a 3g+ plus car already.
All well and good as a direct replacement. But its not a direct replacement loom to go 2g to 3g+ .




Sent from my iPhone using Tapatalk
Actually it is a direct fit and doesn't require chopping at all (!!). You just leave the 2G loom as is and use this one beside it.
 

·
Registered
Joined
·
701 Posts
Well it needed modification to work so it wasn’t a direct fit at all , like you quote in the sales thread.


Sent from my iPhone using Tapatalk
But what needed modification?! Can you elaborate?

I ask this because it actually are direct fit wirelooms, you only have to connect common ground, power wires in the fusebox and a diagnose wire (which even doesn't affect function at all if not connected).
 

·
Registered
Joined
·
701 Posts
Well the loom is pulled from a car with ‘XYZ’ fitted at factory, 99% of the time it wont be going back into the same type car with the same factory fit options or vice versa.
It needs to be modified to suit the car its going into.



Sent from my iPhone using Tapatalk
The "other" options don't matter and are totally irrelevant for the wireloom. The loom I offer fits in EVERY A5, PFL or FL, regardless of other options. The only thing that matters is the fact if the car has B&O (or not) or B&O fitted at the same time.

Sorry, but the thing you claim that the loom needs modification is simply not right. Maybe thats what the company that fitted the wireloom for you claimed (I assume) to make you pay some more!! Hence the 1600...

I know everything about A5's, the function of every single wire. In the weekends retroffing about any option for third parties. So I ask you to don't make statements like you did, or come with solid examples of things that needed adaption / cutting / whatever.

Peace
 

·
Registered
Joined
·
701 Posts
I actually expected an answer like this, when being called out and asked for examples...backing out. So I suppose this thread is getting too hot for you when it comes to technical knowhow.


For others reading this thread I want to specifically point out:

Every wireloom I offer (in this particular example navigation) is complete, doesn't require any adaption / chopping / cutting and DOES save you a hell of a lot of time and money.
If you have questions I am always there to help you out.
 

·
Registered
Joined
·
701 Posts
You don't need the gateway, your 2G gateway is fine.
 

·
Registered
Joined
·
701 Posts
Haha, that specialist was me :)

I do have some stuff laying around which would be needed for the conversion.
 
  • Like
Reactions: gais
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top