Audi A5 Forum & Audi S5 Forum banner

1 - 1 of 1 Posts

·
Registered
Audi A3/A5/A6 and Mitsubishi Evo 8
Joined
·
6 Posts
Discussion Starter #1 (Edited)
Hello guys

Yesterday I change a driver seat belt because there was an error:

1 Fault Found:
9438747 - Igniter for Seat Belt Tensioner; Driver's Side
B1006 1B [137] - Resistance Too High
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 58721 km
Date: 2020.03.21
Time: 06:43:26

And I change Driver's side seat belt (because the wrong belt was folded the car had a rear impact), then an error came out:

1 Fault Found:
9440027 - Driver's side; side airbag igniter
B100B 1B [137] - Resistance Too High
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 58804 km
Date: 2020.03.31
Time: 13:10:37

I can't understand this: Is it an airbag on the seat or on the steering wheel? So I can check the airbags because I have doubts that the one in the seat is gone and put a resistance of 3 ohms.

They had put resistance on the belt
177310


And that seat belt
177311


and I installed a new one

177312


Thank you guys and greetings!
 
1 - 1 of 1 Posts
Top